How Many Amps Does The 18-volt Octane Brushless Reciprocating Saw Draw?

Ridgid Octane 18V One-Manus Reciprocating Saw Tops the Charts in Cutting Speed

The Ridgid Octane 18V one-hand reciprocating saw is the first nosotros've seen designed around the extra performance advanced batteries take to offer. It'southward likewise the only i in the one-hand class to include orbital action. The combination makes for a saw that out cuts some of the biggest names in reciprocating saws.

Pros

• Outstanding cutting speed
• Only saw in this class with orbital action
• Steel wire shoe offers much better visibility than other designs

Cons

• Vibration control needs help
• Biggest and heaviest saw in its class

How Fast Does the Ridgid Octane Ane-Mitt Reciprocating Saw Cut?

Co-ordinate to the spec sheet, Ridgid delivers 3000 strokes per minute with a 3/iv″ stroke length. The charge per unit is amid the best for the ane-mitt form and the stroke length is correct on par.

What Ridgid does differently is add orbital action. Information technology's an unusual motility considering i-hand reciprocating saws are traditionally used to cut PVC, EMT, copper pipe, and other sparse materials. The shorter stroke length makes them less helpful when you're trying to cut 2x.

Orbital activeness makes a difference, though. In our baseline 2 x 10 nail-embedded wood test, Ridgid made it through in an boilerplate of 23.41 seconds. Only the Kobalt 24V Max recip saw had a faster time and these were the just saws in the class to finish under 30 seconds. The worst of the group took nearly two minutes!

On three/4″ EMT, the Ridgid Octane 18V 1-hand reciprocating saw took less than two seconds to make the cut. In one case over again, though, its impressive 1.89-second boilerplate was slightly behind Kobalt at i.79 seconds.

Switching over to 3″ PVC, Ridgid finally earned a well-deserved win. With an average of 4.l seconds, it was the but one-hand model we tested to beat the 5-second marker.

When we crunched the last numbers, Ridgid has the highest overall rating for cutting speed. Information technology's a creature on thin materials and has relevant forest-cut abilities. Nosotros wouldn't desire to use it as a primary wood-cutting saw, merely it tin get you out of a tight pinch meliorate than virtually models and is a great option to pair with a pruning blade for landscaping duties.

How Much Vibration Does information technology Accept?

All of Ridgid's cutting speed comes with more vibration. After having our testing each independently rate each saw for vibration control, the Ridgid Octane finished near the lesser, earning a score of 66 out of 100.

You tin can assist manage the vibration by keeping the shoe firmly engaged confronting the cloth yous're cutting. A pivoting shoe really helps with that. Unfortunately, Ridgid's steel wire shoe is fixed, making it a little tougher to fully engage.

The practiced affair nearly it is that it offers much better cutting visibility than the other models in its class.

How Big is it?

The Ridgid Octane 18V one-hand reciprocating saw is the largest in its form. It'due south 15″ long, making information technology ii.6″ longer than DeWalt's Atomic.

Information technology'south besides the heaviest in the course. Bare, information technology weighs 4.six pounds and the 3.0Ah Octane battery bulks it up to 6.4 pounds.

None of that is a huge surprise, though. Ridgid'southward tools tend to be bulkier and heavier than its premium Pro counterparts. Nosotros also have to keep in mind that while it'due south non the only brushless model, information technology is the simply one designed to take advantage of advanced batteries' power potential. Some of the other models in this course can use an advanced bombardment, but their tool electronics don't tap into their college power benefits.

What Else Should I Know?

Every bit from having a brushless motor and being the only model in its grade with orbital action, the only other key characteristic is an LED calorie-free. It has a separate trigger if you lot'd similar to low-cal it without the blade moving in add-on to coming on when you pull the main trigger.

There's besides a sight line blower, only nosotros didn't find it to be a huge advantage over other models in this course.

With this design, it really looks like Ridgid targeted top-tier performance without adding a lot of bells and whistles to the package. That's not an unusual move for one-hand saws. Most of the other features nosotros run across are spread out without much universal adoption.

Missing Features

• Tool-free adjustable shoe (like the Metabo 18V meaty recip saw)
• Pivoting shoe (Milwaukee M18 Fuel HackZall, DeWalt Atomic recip saw)
• Rafter hook/belt hook (DeWalt Atomic)
• Spring blade ejection (Makita RJ03 reciprocating saw)

How Much Does information technology Cost?

Y'all can pick upward the Ridgid Octane 18V i-hand reciprocating saw runs $99 as a bare tool at Home Depot. You tin also pick up the kit for $228 with a charger and ii.0Ah battery.

The pricing is in the heart of the pack. It's an unusual place for Ridgid to sit considering their tools are normally on the value side. When yous consider its advanced design, it's still a good value if y'all already take Ridgid 18V batteries.

The Lesser Line

In that location's no question about information technology—the Ridgid Octane 18V one-hand reciprocating saw targets high performance and trades off some size, weight, and modest features to go it.

Purchase information technology if yous're looking for top-tier cut speed. Pass if you lot're looking for a more compact design and lower vibration.

Ridgid Octane 18V One-Hand Reciprocating Saw Specs

• Model Number: R86448
• Motor Type: 18V Brushless
• Length of Stroke: 0.75″
• Strokes Per Minute: 3000
• Construction Material: Acrylonitrile Butadiene Styrene (ABS)
• Weight: 4.half dozen lbs
• Warranty: Lifetime Service Agreement, 90-day render policy
• Price: $129 (blank tool)

Source: https://www.protoolreviews.com/ridgid-octane-18v-one-hand-reciprocating-saw-review/

Posted by: stoneboad1945.blogspot.com

Share this post